New Holland F156.6, Руководство по обслуживанию, Страница: 14 / 41

0 - 6 87726937A Edition 12/2007
REPAIR INSTRUCTIONS F106.6 / F106.6A
SAFETY INSTRUCTIONS F156.6 / F156.6A
1.5 Safety information for specific
phases of operation
Normal operation
Refrain from any working methods that might be
prejudicial to safety!
Before starting work, familiarize yourself with the
particular working environment at the location
concerned. Working environment includes, for
example, obstacles in the working/traffic area,
load-bearing capacity of the ground, and safety
barriers necessary at the worksite relative to public
traffic areas.
Take steps to ensure that the machine is only
operated when in a safe and operative condition!
Only operate the machine if all safety devices and
safety-related systems, for example, removable
safeguards, emergency shut-off devices, noise
insulation, extractor systems, are present and in
operative condition.
The machine must be inspected at least once in
each shift for visible damage and defects!
Any changes that occur (including changes in
operational behaviour) must be reported
immediately to the department or person
responsible! If necessary, stop the machine
immediately and secure it.
If there is a malfunction, stop the machine
immediately and secure it! Faults must be repaired
immediately!
Start the machine only from the driver’s position.
Follow the operating instructions, during the
switch-on/switch-off procedures.
Before starting up the machine, ensure that no one
will be put at risk by when the machine is started!
Before starting work / driving, check whether the
brake, steering, lighting and signalling systems are
operational.
Before moving off, always check that attachments
are secured to prevent accidents!
If using public roads, streets, or other areas, follow
the regulations in the highway code and, if
necessary, make the machine road-worthy as
required by the highway code before doing so.
In conditions of poor visibility or when dark, always
switch on the vehicle lights!
Passengers should only sit in the passenger seats
provided for this purpose.
When passing through underpasses, bridges,
tunnels, under overhead lines, etc., always check
that there is sufficient headroom!
Always keep at a sufficient distance from the edges
of trenches and embankments.
Do not use any working methods that might
endanger the stability of the machine!
Do not drive with overhead attachments positioned
in a transverse direction; always drive with
attachments and loads lowered and near the
ground, especially when driving uphill/downhill!
When on a gradient, always adapt vehicle speed to
the particular conditions! Always change to the
lowered position in advance of the gradient, never
while driving on it!
Before leaving the driver’s seat, always immobilise
the machine to prevent it moving off accidentally,
and to prevent access by unauthorized persons.
Switch off the engine!