New Holland F156.6, Руководство по обслуживанию, Страница: 11 / 41

Edition 12/2007 87726937A 0 - 3
REPAIR INSTRUCTIONS F106.6 / F106.6A
SAFETY INSTRUCTIONS F156.6 / F156.6A
1 BASIC SAFETY INFORMATION
1.1 Warning notes and symbols
The following symbols are used in the operating
instructions to indicate particularly important
information:
CAUTION: Safety rules and procedures, designed
to protect the driver and others from mortal dangers
or injuries, and to prevent serious damage to
property.
NOTE: Notes and precautions to avoid damage to
machinery and property.
1.2 Correct use
This machine is constructed according to the
recognized mechanical safety regulations, and
using state-of-the-art technology. Nevertheless,
when in operation, situations can occur that present
serious or mortal dangers to the operator and third
parties, or which could cause damage to the
machine and other property.
The machine should be used only if it is in proper
operating condition, and only by operators who are
aware of the dangers, know the safety procedures,
and have read the operating instructions!
The important notes are placed at the start of this
section. Immediately repair any faults (or have them
repaired) if these could have a prejudicial effect on
safety.
This Grader is principally designed for:
•
Creating a double course
•
Clearing top soils
•
Scarifying old road surfaces and hard ground
•
Cutting embankments
•
Clearing ice and snow
•
Placing, spreading, mixing, and compressing
materials.
The Grader can also be used in conjunction with
other operating equipment for special applications.
The Technical Data provide clear information on this
subject.
Proper use of the machine also means following the
operating instructions and applying the inspection
and maintenance conditions.
Using the grader for any other purpose, for example:
•
transporting personnel,
•
as a working platform,
•
towing or carrying loads without attaching the
proper working attachments, is considered
improper use.
Improper use of the machine can pose mortal
danger to operating personnel or other persons, or
may result in physical injuries, or may cause
damage to property.
The manufacturer, supplier will not be liable for any
damage resulting from improper use. In this case,
the user alone will be responsible.
Noise emission data as stated in statutory order 3
pursuant to the mechanical safety law of 18/01/1991
or EC machinery guideline 89/392/EWG.
Using the earth-moving equipment properly, with
ISO 7096 standard driver seats, will ensure that the
measured vibration frequencies (measured as
described in ISO 2631 Part 1) meet the
requirements regarding protection from whole-body
vibrations.