New Holland 611TL, Руководство оператора

Страница: 35 / 46

Operation
214811
33
5.7.3. Uncoupling Implements, Skid Steer
Tool carrier
IMPORTANT:
Do not place the loader's control valve
in the float position until you have disconnected the
implement. Do not stand on the implement when setting the
lever in the unlocked position.
1. Position the implement a few centimeters above the
ground and tilt it backwards slightly.
2. Turn off the tractor engine and lock the loader control
lever in the neutral position.
Apply the parking brake.
3. Pull out lock handles (1) so that the tool carrier is
disconnected from the implement.
WARNING:
Stand to the side of the implement and keep your
feet away from the loader and implement when
setting the lock handles in the unlocked position.
1
Fig. 79 Pull out the lock handles.
4. Start the engine and lower the loader while carefully
tipping the implement forwards until the tool carrier (1)
disengages from the bucket's plates (2).
5. Back tractor/loader away from the implement.
2
1
Fig. 80 Tool carrier
5.7.4. Coupling Implements, Skid Steer
Tool carrier
1. Open the left and right lock handles (1) before starting
the tractor.
1
Fig. 81 Open the left and right lock handles (1) before starting
the tractor.