New Holland 200 Series, Руководство оператора

Страница: 77 / 292

3 - CONTROLS AND INSTRUMENTS
H control pattern lift arm and bucket controls
Lift arm raise/lower control
931007524
1
Lift arm raise and lower control.
• The left-hand control lever
(1) controls the lift arm. The
lift arm will raise by pivoting the handle “UP” to the out-
side of the cab. Pivoting the handle “DOWN” to the in-
side of the cab will lower the lift arm.
• The lift arm spool is equipped with a detent “FLOAT” cir-
cuit if the operator wants the lift arm to float over chang-
ing ground contour.
For the Electro-Hydraulic (EH) system, the float is en-
gaged by pressing the float button on the right-hand
control lever
(2) and pushing the left-hand control lever
(1) partially to the down stroke. If the operator has the
left-hand control lever partially in the down stroke po-
sition and then presses the float button, the float will
engage. To disengage the float, pull the left-hand con-
trol lever to the up stroke slightly.
BS06H186B
2
3-17