NEW BRUNSWICK SCIENTIFIC innova 4340, Руководство по эксплуатации

Страница: 25 / 87

13
New Brunswick Scientific User’s Guide
The outside dimensions of the Innova 4340 are:
OUTSIDE DIMENSIONS Inches Centimeters
Width
45 114
Depth
28 71
Height
37 94
The effective surface area required for operation is:
REQUIRED SURFACE AREA
Inches Centimeters
Width 48 122
Depth 30 76
3.5 Electrical Connections
1. If you have not already done, so, check the voltage and frequency selector
switches on the rear of the unit to ensure that it is set to the appropriate voltage
and frequency.
2. Remove the caution label from the rear of the unit.
3. Set the circuit breaker on the front side of the unit to the OFF position.
ONLY THEN:
4. Connect the power cord to the power cord connection and to a grounded
electrical outlet.
3.6 Installation of Platform
A platform must be installed on the unit prior to use. To install the platform:
1.
Set the power switch to the OFF position. Open the cover.
2. The unit is shipped with the four platform screws installed in the subplatform
of the bearing housing. These screws must be removed before a platform can
be installed. Using the 7/32” hex wrench provided, loosen and remove the
platform screws from the bearing housing.
CAUTION!
Be sure to use the following checklist BEFORE making
electrical connections.
CAUTION!
A grounded electrical outlet is necessary for the safe
operation of this instrument.