Rev. 02 del 24/07/13
7/14
–
C o n n e c t i o n o f t h e h a n d l e
Before turning on the instrument, connect the handle to the output placed in the
inferior part of the device through the connector of the cable. To insert the
connector rotate it until the connections coincides with the output; once inserted,
screw to fix well the cable to the instrument
–
A p p l i c a t i o n o f t h e h a n d l e
Place the head of the handle directly on the skin in a perpendicular way (90°);holock
the handle during all the application. For the techniques of application see. section.
Applications.
– S w i t c h o n o f t h e d e v i c e
To turn on the BIOLASER press the key ON/OFF on the rear of the device. The
display shows a welcome message with the software version and then the Selection
Menu. It will automatically be set on first preset program
.
–
S e l e c t i o n o f t h e p r o g r a m
Select the program with the keys UP/DOWN (see. section. Programs) and confirm
with START. The programs are listed in the charts in “Preset protocols”
- I n t e n s i t y o f e m i s s i o n
The intensity of the emission of the handle is fixed. The dose, that is to say the total
energy transferred to the body, is presetted and different in each program. It is
possible to vary the dose with the keys (+) / (-) 2 (changing the dose you got a
proportional adjustment of the Timer). The modulation 1/1, 1/2 ,1/4 is shown beside
the dose XX.Y and it can be changed with the keys (+) / (-) 1. With the modulation
you can vary the intensity of issue of the handle from the maximum one (1/1), to an
intermediary value (1/2) and finally to the last one (1 / 4).
ATTENTION:
in case of pain or elevated heating of the treated zone, it is necessary
to remove immediately the handle and to interrupt the therapy.
–
P a u s e / i n t e r r u p t t h e t h e r a p y
If you want to interrupt the therapy before the term , press the key (I) ON/OFF for a
few seconds continue press START); twice to finish the program and to return in
phase of Programs selection.
