15
User Manual – Gigabit PoE Supply NPS-30W | BDA 579 V2 2020/06
Operation
w
NOTE
Use only original Neutrik screws to prevent damage to the device.
5.4.1 Mounting brackets NA-MB-KIT
The mounting brackets make it possible to mount the device in floor boxes, underneath tables, etc.
Scope of delivery
Assembly of the mounting brackets
2 brackets
2 fixing screws
2 torx screws
2 spacers
1
T
Remove the rubber protection.
2
T
Mount a bracket, a spacer and a screw on the device as
shown on the picture.
T
Tighten the screw with the screwdriver.
T
Repeat these steps on the opposite side of the device.
3
4
T
Mount the fixing screw as shown on the picture.
T
Repeat these steps on the opposite side of the device.
T
Turn the brackets as required for the mounting
situation.
T
Tighten the fixing screw firmly.
Prepare the following tools:
O
Torx Screwdriver (T10)