Neuton CE 5.3, Руководство по безопасности и эксплуатации

Страница: 21 / 28

NEUTON CE5.3
Battery-Powered Mower
-
Safety & Operating Instructions
19
Troubleshooting Table - continued
P
ROBLEM
C
ORRECTIVE
A
CTION
The Battery LED does
not turn RED when the
Charger is connected.
⇒
Unplug the Battery Charger from your standard 110V wall outlet and from the Charger Receptacle on
the Battery. Inspect the Battery Charger for any visible signs of damage to the body and the cord. If you
observe damage to the Battery Charger, please discontinue use.
Use of a damaged Battery Charger may cause a short circuit and the potential for a fire.
⇒
Inspect the Charger Receptacle on the Battery for any signs of visible damage or debris. If there is debris
present, please use caution to remove the debris.
Do not remove the debris with any metallic objects, damp or flammable items, or items that may
become lodged in the Charger Receptacle as this may cause a fire, or explosion of the Battery. If you
observe damage to the Charger Receptacle, please discontinue use.
Use a vacuum equipped with a non-metallic nozzle to remove debris from the Charger Receptacle on
the Battery.
NOTE:
You can damage the Charger Receptacle by excessive force. It should not take a great amount of force to
insert the round Charger Connector. Please do not force the round Charger Connector into the Charging
Receptacle on the Battery.
⇒
Verify your Standard 110V wall outlet is functioning correctly by plugging a lamp or other electrical
device into the same socket on the wall outlet you are intending to use.
TIP