14
Change Parameters
To change parameters, press the program button once again. Then press the
Down button.
Change
Parameters?
↓
Frequency
The frequency is the rate at which stimulation pulses are sent. For example,
for a 50 Hz frequency, pulses are sent at a rate of 50 per second or one every
0.020 seconds. The frequency can be selected in the range of 2 - 160 Hz. The
default is 50 Hz.
Frequency:
50 Hz
To increase the frequency, press the Up button. To decrease, press the Down
button. This parameter normally does not need to be changed by the user.