17 inch LCD/Keyboard Rack Kit Installation Guide
press the Menu button at the rear of the LCD panel twice, which will select the Display Mode menu. Note that
deviations of a fraction of a hertz in the displayed refresh rate are not significant.
NOTE:
If the monitor self configures to any other resolution, it is likely that the frame buffer has been explicitly
configured to display that particular resolution. If running Solaris 8 or above, use the “
fbconfig –defaults”
command to reset the resolution to the default, and then reboot the system. With earlier versions of Solaris, use
the appropriate command for your particular frame buffer (E.g. “
ffbconfig – defaults”
for the Creator[3D] frame
buffer).
Page 8 of 14
