Doc #: 60-00118 Rev. A
23
Settings
–
Custom Protocol Admin
–
Add
Choose a unique name for the protocol and choose whether it is for a Complete or Limited exam.
Clicking Add will display a vessel option box and clicking the down arrow will display the entire
vessel list. Select the vessel, then choose the starting depth and power. (Default depth for all
vessels is 50 mm. Default power is 80% for all high-power vessels and 10% for low-power
vessels).
Continue the sequence to complete the protocol, then click Save.
Use caution when deleting custom protocols. Any completed exams with that custom
protocol will be deleted with the deletion of the protocol.
PACS
To set up communication with a PACS, go to:
Settings
–
PACS
On this screen, the Server Address, Port ID, Remote AE and Local AE can be entered. Press
Test Connection, to ensure a proper connection.
Connection of the Lucid
™ M1 System to an IT-NETWORK that includes other equipment
could result in previously unidentified RISKS to PATIENTS, OPERATORS or third parties.
Turning Off the System
1. Press the power button on the left side of the system for at least 5 seconds (reference the
Physical Description section of this manual).
Transport
The Lucid
™ M1 System is designed to be a portable system that can be hand-carried or
transported on a mobile cart.
1. Turn off the system by following the procedure described in the Turning Off the System
section.
2. Unplug the DC power connector from the back of the system; carefully unplug the AC
adapter from the AC power outlet.
3. The Rear Stand may be folded for easier handling (see Rear View in the Physical
Description section of this manual).
