8
EN
1. Introduction
This manual contains essential in-
formation for the operation and care
of the product you have purchased.
Please read the instructions care-
fully and completely before using the
equipment. Please keep this manual
where it will be accessible at all times
to all current and future users.
Additional information, in particular
concerning available accessories and
Neumann service partners, can always
be found on our website:
www.neumann.com.
Information about service partners
can also be obtained by telephone:
+49 (0) 30 / 41 77 24 - 0.
The following related fi les are avail-
able in PDF format in the Downloads
section of our website www.neumann.
com:
• Some Remarks on Microphone Main-
tenance
The Neumann online forum on our
website enables Neumann users
worldwide to share their experiences.
Through its integrated archive func-
tion, the forum has developed into an
extensive knowledge pool.
2. Safety instructions
The microphone has the intended pur-
pose of converting acoustical signals
into electrical signals.
Connect the microphone only to mi-
crophone inputs and devices which
supply 48 V of phantom power in
accordance with IEC 61938.
Repairs and servicing are to be car-
ried out only by experienced, autho-
rized service personnel. Unauthorized
opening or modifi cation of the equip-
ment shall void the warranty.
Use the equipment only under the
conditions specifi ed in the “Technical
data” section.
Allow the equipment to adjust to the
ambient temperature before switching
it on.
Do not operate the equipment if it has
been damaged during transport.
Always run cables in such a way that
there is no risk of tripping over them.
Ensure that liquids, and electrically
conductive objects that are not re-
quired for operation are kept at a safe
distance from the equipment and its
connections.
Do not use solvents or aggressive
cleansers for cleaning purposes.
Dispose of the equipment in accor-
dance with the regulations applicable
to the respective country.
