Specifications
lin
40 Hz
100 Hz
0 dB
-6 dB
-12 dB
Change settings
LEDs on
High-pass filter
Pre-attenuation
Acoustic operating principle
Directional pattern
Frequency range
Sensitivity at 1 kHz into 1 kΩ
Rated impedance
Rated load impedance
Signal-to-noise ratio, CCIR
1)
(rel. 94 db SPL)
Signal-to-noise ratio, A-weighted
1)
(rel. 94 db SPL)
Equivalent noise level, CCIR
1)
Equivalent noise level, A-weighted
1)
Maximum SPL for THD ≤ 0.5%
2)
Maximum SPL for THD with pre-attenuation -6 dB
Maximum SPL for THD with pre-attenuation -12 dB
Max. output voltage for THD > 0.5%
Supply voltage (P48, IEC 61938)
Current consumption (P48, IEC 61938)
Matching connector
Weight
Dimensions (diameter / length)
Operating temperature range
Storage temperature range
Humidity range
Pressure gradient transducer
Omni, wide angle cardioid,
cardioid, hypercardioid, figure 8
20 Hz - 20 kHz
11 mV/Pa –39 dBV ± 1 dB
50 Ω
1000 Ω
72 dB
84 dB
22 dB
10 dB-A
141 dB
147 dB
153 dB
10 dBu
48 V ± 4 V
3.2 mA
XLR3F
445 g
ø 64 mm / 145 mm
0 °C - +70 °C (32 °F - 158 °F)
−20 °C - +70 °C (−4 °F - 158 °F)
max. 90 % at +20 °C
1)
according to IEC 60268-1; CCIR-weighting according to CCIR 468-3, quasi peak; A-weighting according to IEC 61672-1, RMS
2)
measured as equivalent el. input signal
