NEULOG GRAPHIC DISPLAY UNIT GUIDE
NeuLog graphic display module
VIEW-101
The NeuLog VIEW-101 graphic display unit is the ideal option for data
collection with NeuLog sensors when access to computers or other smart
devices is difficult or not at all possible. Up to 5 NeuLog sensors can plug
directly into the viewer at a time to provide real time graphics of the data
being collected.
Software on the viewer is almost identical to the version downloaded from
the NeuLog website – only it has been made more intuitive for use with the
viewer. This allows for users to start experimentation immediately without
having to learn an entirely new software package.
The viewer’s screen uses resistive touchscreen technology which reacts to a
pressure being applied to the screen – opposed to the more common
capacitive screen which requires an electrical conductor to operate. This
allows for students to operate the screen even while wearing gloves.
Materials required:
NeuLog viewer
NeuLog battery module
Any NeuLog sensors (up to 5 per experiment)
Using the NeuLog viewer:
Viewer buttons:
Search for connected sensors
Run experiment while
displaying the results.
Stop experiment.
Upload data from sensors. Also functions to zoom the graph
out.
Zoom fit the graph.
Erase graph.
Experiment setup – sampling rate, and duration.
Tools – Set sensor/RF ID, screen shutdown, power off.