NX-507E / NX-508E AUXILIARY MODULES
13
XI.
PROGRAMMING EXAMPLES
Possible application for NX-508E outputs:
•
Example #1
Turn on entryway light upon entry only during nighttime.
•
Example #2
Turn a device on or off during business hours.
•
Example #3
Arm the system.
NOTE TO EXAMPLE #3: The opening time is defaulted to 0800 for all
schedules. With this example, the NX-508E will try to Auto Arm after every 45 minutes of inactivity on the
Ready LED, from closing time to opening time.
(Feature Selections to be programmed are shown in
bold Italics
text.)
Example #1
To have Output #1
trip and activate an X-10 module
with House code C and Unit Code
4 for 6 minutes when Zone 1 is
faulted only from 5:00 p.m. to 9:00
a.m., program the following:
SEGMENT
LOC
1
2
3
0 42 1 6
1
LED
1
2
3
4
5
6
7
8
2
1
2
3
4
5
6
7
8
3 3 2
32 9 0
33 17 0
34
1
2
3
4
5
6
7
8
Example #2
To have output 5 trip
and activate an X-10 module with
a House code of P and a Unit code
of 8 from 9:00 a.m. to 5:00 p.m.
Monday to Friday, but not at all on
Saturday or Sunday, program the
following:
SEGMENT
LOC
1
2
3
16 51 0 0
17
LED
1
2
3
4
5
6
7
8
18
1
2
3
4
5
6
7
8
19 7 15
32 9 0
33 17 0
Example #3
To have Output 3
Auto Arm partitions #1 & 2 at 7:00
p.m. Monday thru Friday, 9:00 p.m.
Saturday, but not at all on Sunday,
program the following:
SEGMENT
LOC
1
2
3
8 48 3
10
9
LED
1
2
3
4
5
6
7
8
10
1
2
3
4
5
6
7
8
33 19 0
36 21 0
37 1
2
3
4
5
6
7
8
0
38 0 0
39 23 59
40
1
2
3
4
5
6
7
8
