Set-Up
The Iridium GO! device contains an internet portal which can be used to modify device
settings through your laptop or computer. To access the portal, connect to the Iridium
GO! Wi! Fi via your laptop or computer, open either a Chrome or Safari internet
browser and enter 192.168.0.1 in the address bar. Press Enter on your keyboard and
login with the administrator account. By default, the administer account user name is
“guest” and the password is “guest”. Press the “Login” button to access the Iridium
GO!TM Advanced Features portal.
1: General
The device can have up to 4 different registration states:
• Searching: The device is attempting to establish communications with the
satellite
network.
• Registering: The device is in the process of registering with the network
• Registered: The device is now registered with the network.
• Denied: The device has seen a network, but has been denied access
•
GPS:
This field will display the current state of the GPS, either
No fix
or
fix
No fix: The GPS does not have a valid fix and cannot determine
your
location
Fix: The GPS has a valid fix and can determine your location (Note:
the actual
position information is displayed on the GPS page of the portal)
Wi
-FI
:
Indicates if Wi
-
Fi is currently
ON
or
OFF
(the device defaults to On).
SSID:
Displays the Service Set Identifier (SSID) of the Wi
-
Fi connection.
Gateway IP:
The gateway network IP address of the Iridium GO! device.
Number of Logged In Clients:
Indicates the number of Iridium GO!
application users currently connected logged into the
device.
Thank you for your purchase! Iridium GO! Quickstart Guide
Prior to embarking on a journey requiring the use of your new
Iridium GO!, please take a moment to familiarize yourself with
user-guide enclosed in your Iriduim GO! box, review the
following quick start guide, charge your batteries, and test with
your mobile devices. It your sole responsibility to become
familiar with the phone and report any deficiencies immediately
to Network Innovations.
