ETH1000MC
Rev. 6
Network Electronics ASA, P.O.Box 1020, N-3204 Sandefjord, Norway. Tel.: +47 33 48 99 99 - Fax: +47 33 48 99 98
8.3 Dip switches
The tables below explains the functionality of the dipswitches shown in the below figure.
Dip sw # 1
Dip sw # 8
Dip switch #
Description
1 Enable
10Mbit
2 Enable
100Mbit
3
Enable 1000Mbit (GbE)
4 Reserved
5 Reserved
6 Reserved
7 Reserved
8 Gyda
override/DIP
When DIP switch 1,2 and 3 are all on or all off, highest speed possible will be used when link
connection.
Switch 1 disables 10Mbit connection when DIP is closest to board edge. Switch 2 enables/disables
100Mbit and switch 3 enables/disables 1000Mbit.
Dip 4, 5, 6 and 7 are reserved.
Dip 8 sets if Gyda is able to configure or not. When Gyda override is set, the actual setting can be read by
using the info command (se Gyda user manual for details).
E-mail: [email protected] - Web: http://www.network-electronics.com/
Technical specifications are subject to be changed without notice.
9
