8
6-3 Installation
1
．
The RA0730
does not have the waterproof function. After the device completes joining the network, please place it indoor.
2
．
The R72630
has a waterproof function. After the device completes joining the network, please place it outdoors.
(1)
In the installed position, loosen the U-shaped screw, the mating washer and the nut at the bottom of R72630, and
then make the U-shaped screw pass through the appropriate size cylinder and fix it on the fixing strut flap of R72630.
Install the washer and the nut in order and lock the nut till R72630 body is stable and does not shake.
(2)
At the upper side of the fixed position of R72630, loosen the two U-shaped screws, the mating washer and nut on
the side of the solar panel. Make the U-shaped screw pass through the appropriate size cylinder and fix them on the
main bracket of the solar panel and install the washer and the nut in sequence. Lock nut till the solar panel is stable and
does not shake.
(3) After adjusting the angle of the solar panel completely, lock the nut.
(4) Connect the top waterproof cable of R72630 with the wiring of the solar panel and lock it tight.
3
．
RA0730Y
is waterproof and can be placed outdoors after the device completes joining the network..
(1) In the installed position, loosen the U-shaped screw, the mating washer and the nut at the bottom of RA0730Y, and then
make the U-shaped screw pass through the appropriate size cylinder and fix it on the fixing strut flap of RA0730Y. Install
the washer and the nut in order and lock the nut till RA0730Y body is stable and does not shake.
(2) Loosen the M5 nut at the bottom of the RA0730Y matte and take the matte together with the screw.
(3) Make the DC adaptor pass through the central hole of the bottom cover of RA0730Y and insert it into the RA0730Y DC
socket, and then put the mating screw to the original position and lock the M5 nut tight.
Range of diameter of post for mounting
Ø25~ Ø 50(mm)
