background image

 

 

4. Set up Instruction 

On/Off 

 

Power On 

Insert batteries. (users may need a screwdriver to open) 

Turn On 

Press and hold the function key for 3 seconds till the green indicator flashes once. 

Turn Off (Restore to factory setting)  Press and hold the function key for 5 seconds and the green indicator flashes 20 times. 

Power Off 

Remove Batteries 

Note 

1.  Remove and insert the battery: the device is in the turn-off state by default. 

2.  After 5 seconds of powering on, the device is in engineering testing mode. 

3.  Every time, after remove and reinsert the battery, the device is in a turn-off state and 

need to turn on again. 

4.  On/off interval is suggested to be about 10 seconds to avoid the interference of capacitor 

inductance and other energy storage components. 

Network Joining 

 

Never Join the Network 

Turn on the device to search the network. 

The green indicator stays on for 5 seconds: success 

The green indicator remains off: fail 

Had joined the network 

Turn on the device to search the previous network. 

The green indicator stays on for 5 seconds: success 

The green indicator remains off: fail 

Fail to join the network 

Suggest to check the device verification information on the gateway or consult your platform 

server provider. 

Function Key 

 

Press and hold for 5 seconds 

Restore to factory setting / Turn off 

The green indicator flashes 20 times: success 

The green indicator remains off: fail 

Press once 

The device is in the network: green indicator flashes once and sends a report 

The device is not in the network: green indicator remains off 

Sleeping Mode 

 

The device turns on and joins in the 

network 

Sleeping period: Min Interval 

When the reportchange exceeds setting value or the state changes, send a data report according 

to Min Interval 

The device is powered on but not 

connected to the network 

Note: 

1. It is recommended to take out the battery when the device is not in use; 

2. It is recommended to check the device registration information on the gateway. 

Low Voltage Threshold Alarm 

 

Low Voltage 

3.2 V 

 

 

 

 

Содержание R720FLT














Отзывы: