3
3. Main Features
⚫
Adopt SX1276 wireless communication module
⚫
2 ER14505 battery AA SIZE (3.6V / section) parallel power supply
⚫
Can detect two voltage values and two water leakage status
⚫
The base is attached with a magnet that can be attached to a ferrous object
⚫
Protection class IP65/IP67 (optional)
⚫
Compatible with LoRaWAN
TM
Class A
⚫
Frequency hopping spread spectrum
⚫
Configuration parameters can be configured via a third-party software platform, data can be read and alarms can be set via
SMS text and email (optional)
⚫
Applicable to third-party platforms: Actility/ThingPark, TTN, MyDevices/Cayenne
⚫
Low power consumption and long battery life
Note*:
Battery life is determined by the sensor reporting frequency and other variables, please refer to
http://www.netvox.com.tw/electric/electric_calc.html
On this website, users can find battery life of various models in different configurations.
4.Set up Instruction
On/Off
Power on
Insert batteries.
(users may need a flat blade screwdriver to open)
Turn on
Press and hold the function key for 3 seconds till the green indicator flashes once.
Turn off
(Restore to factory setting)
Press and hold the function key for 5 seconds till the green indicator flashes for 20 times.
Power off
Remove Batteries.
Note:
1. Remove and insert the battery; the device is at off state by default. Press and hold the function key
for 3 seconds till the green indicator flashes once to turn on the device.
2. On/off interval is suggested to be about 10 seconds to avoid the interference of capacitor
inductance and other energy storage components.
3. At 1
st
-5
th
second after power on, the device will be in engineering test mode.
Network Joining
