4
4.
Set Up Instruction
On/Off
Power On
DC12V adapter
Turn On
Press and hold the function key for 3 seconds till the green
indicator flashes once.
Turn Off (Restore to factory setting)
Press and hold the function key for 5 seconds, and the green
indicator flashes 20 times.
Power Off
Remove DC12V adapter
Note
1. Remove and insert the battery, and then the device is at off
state by default.
2. On/off interval is suggested to be about 10 seconds to avoid
the interference of capacitor inductance and other energy
storage components.
3. Five seconds after power on, the device will be in engineering
test mode.
Network Joining
Never Join the Network
Turn on the device to search the network.
The green indicator keeps on for 5 seconds: success.
The green indicator remains off: fail
Had Joined the Network
(Not in the original setting)
Turn on the device to search the previous network.
The green indicator keeps on for 5 seconds: success.
The green indicator remains off: fail.
Fail to Join the Network
Suggest checking the device registration information on the
gateway or consulting your platform server provider if the device
fails to join the network.
Function Key
Press and Hold for 5 Seconds
Restore to the original setting / turn off
The green indicator flashes 20 times: success
The green indicator remains off: fail
Press once
The device is in the network: the green indicator flashes once and
the device sends a data report
The device is not in the network: the green indicator remains off
