4
4.Set up Instruction
4.1 Power on and Turn on / off
(1)
Power on
: insert batteries: open the battery cover; insert two sections of 3.6V ER14505 AA
batteries and close the battery cover.
(2)
Turn on
: if the device had never joined in any network or at factory setting mode, after powering
on, the device is at off mode by default setting. Press and hold function key for 3 seconds till the
green indicator flashes once and release.
(3)
Turn off:
press and hold function key for 5 seconds till the green indicator flashes quickly and
release. The green indicator will flash 20 times to show that the device is turned off.
Note:
1.
The interval between shutting down twice or power off/on is suggested to be about 10s to avoid
the interference of capacitor inductance and other energy storage components.
2. Do not press function key and insert batteries in the same time, otherwise, it will enter engineer
testing mode.
4.2 Join Into LoRa Network
To join the device into LoRa network to communicate with LoRa gateway.
The network operation is as following:
(1)
If the device had never joined any network, turn on the device; it will search an available LoRa
network to join. The green indicator will stay on for 5 seconds to show it joins into the network,
otherwise, the green indicator does not work.
(2)
If the device had been joined into a LoRa network, remove and insert the batteries; it will repeat
step (1).
4.3 Function Key
(1)
Press and hold function key for 5 seconds to reset to factory setting. After restoring to
factory setting successfully, the green indicator will flashes quickly 20 times.
(2)
Press function key to turn on the device which is in the network and the green indicator will flash
once and the device will send a data report.
4.4 Data Report
When the device is turned on, it will immediately send a version package.
Data will be reported once per hour by default setting.
Maximum time: 3600s
Minimum time: 3600s (Detect the current voltage value every 3600s by default setting)
Default reportchange:
Battery ---- 0x01 (0.1V)
