9
6. Installation
8. Installation
1.
Remove the 3M adhesive on the back of the Activity Timer
and attach the body to the surface of a smooth object (please
do not stick it to a rough surface to prevent the device from
falling off after a long time use).
Note
：
Wipe the surface clean before installation to avoid dust on
the surface to affect the adhesion of the device.
Do not install the device in a metal shielded box or other
electrical equipment around it to avoid affecting the wireless
transmission of the device.
2. When the device detects a sudden movement or vibration of
the object (or electrical machinery).
Wait for a certain period of time (DeactiveTime- default 5
seconds , can be modified) to enter the quiescent state and it
sends a report of duration of vibrations, and restarts the
calculation for the next detection, the timer data will clear.
Note
：
If the vibration continues to occur during this process
(quiescent state), the timer continue calculation until the
device enter the quiescent state.
Activity Timer (R313FC) is suitable for the following
scenarios:
Industrial Equipment
Industrial Instrument
Medical Instruments
When it necessary to detect the motor running time.
