5
5. Data Report
Data report configuration and sending period are as following:
Min Interval
(Unit:second)
Max Interval
(Unit:second)
Reportable Change
Current Change
≥
Reportable Change
Current Change
＜
Reportable Change
Any number between
1~65535
Any number between
1~65535
Can not be 0.
Report
per Min Interval
Report
per Max Interval
The device will immediately send a version packet report along with an uplink packet including battery voltage, leak status
The device sends data in the default configuration before any configuration is done.
Default setting:
Maximum time: 3600s
Minimum time: 3600s
Battery: 0x01 (0.1V)
R311W sensor is triggered:
When the R311W status changes, it will send warning report.
No water leak:0
Water leak:1
Note:
The reported data is decoded by the Netvox LoRaWAN Application Command document and
