Installation instructions Universal Device Rack Netti III Comfort HD / XHD / Mini SW 35
MD 0167UK Installation instructions - Universal device rack
08-2018
My.Netti.com Page 5 of 10
2. Support tubes
The support tubes have 3 alternative M5
mounting positions for different seat depths
(see Fig. 2)
Position 3 for seat depth: 50
–
57.5 cm
Position 2: for seat depth: 45
–
47.5 cm
Position 1: for seat depth: 40
–
42.5 cm
Slide the left and right support tubes into the support sleeves on the wheelchair
frame for the standard anti-tips and secure them using the mounting holes shown
in Fig. 3 using the M5 screws provided.
M5 thread
2.a Installation on a Netti Mini SW 35
Unscrew and remove the screws shown in fig. 3 from the left and
right anti-tip support sleeves.
Slide the universal device rack’s
support tubes into the
anti-tip sleeves up to position 4.
Secure the universal device rack using the screws you removed.
3. Positioning the retaining brackets
The platform (Fig. 4) allows the retaining brackets (Fig. 5) to be mounted in any position.
Undo the 3 screws holding each bracket, position the brackets to suit the device involved and screw them
into place, Fig. 6. Foam can be used to fill any gaps between the device and the brackets. The anti
vibration pads, Fig. 7, provided, can be fixed to the bottom of the device. An additional set of 4 retaining
brackets can be ordered under option number D42900.
B
E
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 3
3
2
1
Fig. 2
4