Installation instructions Universal Device Rack Netti III Comfort HD / XHD / Mini SW 35
MD 0167UK Installation instructions - Universal device rack
08-2018
My.Netti.com Page 3 of 10
Contents:
1.
Introduction to the universal device rack and protective cover / second level
2.
Assembling the mounting tubes to the frame
3.
Positioning the support rackets
4.
Installing the anti-tips - see warning
5.
Adjusting the anti-tip supports
6.
Installing the optional protective cover
7.
Installing an oxygen cylinder
8.
Images of a fully assembled universal device rack
9.
Retrofitting a universal device rack to an existing Netti III
10. Dimensions and data
11. Basic configuration of the Netti III HD / XHD for use with the universal device rack
12. Maximum loads
13. Important notes for user and carers
14. Instructions and advice for use of a wheelchair together with the universal device rack
Warning: the anti-tips must be turned and locked downwards
whenever the rack is mounted on a wheelchair
Warning: the wheelchair with Universal device rack is NOT approved
for being used as a seat in a vehicle!
The following pictures in this manual showing the old type of the universal device rack.
The function and installation procedure remains the same after the design change.
The dimension after the design change have changed. Please have a look at page 9 to get the actual sizes.