background image

6  

  [email protected]

My-Netti.com

Model: 

Netti Dynamic System

Language: 

English

 

Version:

 

2021-03

INTENDED USE

Netti Dynamic System is an advanced mobility 

aid for users affected by dystonia. It is for users 

with extensive movement patterns resulting 

in strong spasms and contractions of the 

user’s musculoskeletal apparatus causing joint 

dislocations, involuntary movements, sliding, loss 

of function and also challenging the strength of the 

wheelchair.

The patented Netti Dynamic System accommodates 

the user’s extension movements letting the 

wheelchair work in synergy with the user’s 

movements. When accommodating the spastic 

extensions pattern, muscle tone and frequency of 

spasms could be reduced. The wheelchair is dynamic 

and will follow the user’s movements of both upper 

and lower body. 

NETTI DYNAMIC SYSTEM 

allows for Open Kinetic Chain movements (OK-C):

•  Leg movements

•  Hip movements

•  Back movements

•  Head movements

•  Foot movements

IMPORTANT BENEFITS

•   The wheelchair adapts to the movements  

of the user.

•   The user will have less discomfort during spasm  

as the wheelchair supports the movement.

•   After a spasm the user returns to the original 

sitting position securing a good position and 

pressure distribution.

•   It prevents unintentional change of position.

•   It prevents the user from sliding forward in the 

chair and thereby getting a bad sitting position 

and inadequate distribution of pressure.

•   Extends the lifetime of the wheelchair.

CONTRA INDICATIONS 

Limitations of the Netti Dynamic system 

•   when allowing movements leads to destructive 

postures.

•   when allowing movements increases extension 

tone and spasms.

•   when the client may not be able to return to a 

neutral position.

Содержание Dynamic System









































Отзывы: