10
Model:
Netti
Dynam
ic Leg su
pport
Language:
English
Version:
2017-05
Make sure there is enough free space
under the footboard for the wheelchair
to pass minor obstacles. slightly tilt-
ing the seating unit may help. if not
sufficient, the chair height must be
adjusted as described in the main user
manual for the wheelchair model.
5. CalF suPPorts
aDjustMeNts
With both leg supports in correct
height, the calf supports must be ad-
justed:
5.1 netti Dynamic DUaL: calf
support height adjustment:
loosen the two M6 screws with
5 mm allen key - on the half-moon
brackets - holding the calf pad arm.
this allows the calf support-pad arm
to move up and down. the calf sup-
ports should in addition to supporting
the calf also help prevent the feet slid-
ing backwards from the footboard.
Choose a height covering the middle
and lower part of the user’s calf and
tighten the screws.
twist the calf pads to an angle giving
support for the leg when the foot sup-
port is angled. the calf pads can swing
freely to follow the movements and
adjust to the user’s leg position.