manualshive.com logo in svg

Netscout OneTouch AT G2, Руководство пользователя, Страница: 360 / 396

Поделиться
Скачать
Netscout OneTouch AT G2 Скачать руководство пользователя страница 360

OneTouch AT and OneTouch AT G2

User Manual

344

When you tap the 

SAVE

 button, the SAVE AS screen is displayed. 

Figure 148. SAVE AS Screen

You can tap the 

DONE

 button to save the file with the suggested 

file name, or you can use the keyboard to change the name.

VIEW

The 

VIEW

 button is available in the REPORTS file manager and the 

SCREENS file manager.

LOAD

The 

LOAD

 button is available in the PROFILES file manager and 

the AP AUTHORIZATION file manager.

When you tap the 

LOAD

 button, the current profile or AP 

authorization list is replaced by the one you load. So consider 
saving the current profile or AP authorization list before you tap 
the 

LOAD

 button. 

The 

LOAD

 button puts the highlighted profile or AP authorization 

list into use. A loaded profile or AP authorization list can be 
modified and re-saved using the same name or a different name. 
When a profile has been modified, an asterisk appears after its 

Содержание OneTouch AT G2













































































































































































































































































































































































































Отзывы:

Нет отзывов