manualshive.com logo in svg

Netscout OneTouch AT G2, Руководство пользователя, Страница: 227 / 396

Поделиться
Скачать
Netscout OneTouch AT G2 Скачать руководство пользователя страница 227

Chapter 8: Wi-Fi Analysis

Access Point Analysis

211

Figure 88. Bonded Channel AP Details

The Channel section lists the center frequency, frequency 
range, channel width, and primary and secondary bonded 
channels for each band. 

The Networks section (see Figure 87) shows each BSSID, 
SSID, and security protocol in use for each band. 

Tap the information button to display quick tips about the 
screen.

This is the date and time when the AP was first discovered.

Tap the Wired Discovery button 

, if shown, to go to the 

current device’s wired details screen. To return to the Wi-Fi 
details screen, tap the Wi-Fi Discovery button 

 shown on 

the wired device details screen. The Discovery buttons will only 
be visible when a device has been discovered during Wired and 
Wi-Fi Analysis. 

Tap the Interferer Filter Button to show a summary of non-
802.11 devices interfering with the AP. Tap the SHOW ALL 

 button to show all interferers again.

Содержание OneTouch AT G2













































































































































































































































































































































































































Отзывы:

Нет отзывов