Netscout OneTouch AT 10G, Руководство пользователя

Страница: 62 / 248

OneTouch AT 10G
User Manual
60
An asterisk is also displayed after the profile name at the top-left
corner of the HOME screen, to indicate that the test profile has
been changed. See Chapter 6: "Profiles," beginning on
page 139 .
Move, Copy, or Delete a User Test
Touch and hold the test’s icon on the HOME screen. Four icons
appear at the bottom of the screen.
 Tap the stop button to cancel the operation.

Tap the trash can to delete the test.

Tap the copy icon to copy the test. The copied test appears to
the right of the original test.

Tap the move icon, then tap a highlighted destination to
move the test.
 If you do not tap one of the Cancel, Delete, Copy, or Move
icons, you can tap a destination on one of the three user test
tiers to move the test.
More About AutoTest
AutoTest is the automatic test feature of the OneTouch AT 10G
analyzer.
AutoTest provides a comprehensive test of network
infrastructure, followed by customizable user tests that you
define.
 Network Infrastructure Tests are described on page 63.
 User Tests are described on page 83.
When AutoTest runs, the HOME screen is displayed so you can
monitor the overall results. You can tap a test’s icon to view its
RESULTS screen.
When AutoTest completes, the analyzer retains its wired
connections (link and IP address), and wired analysis begins.
When you run AutoTest again, the following actions occur.