manualshive.com logo in svg

Netscout OneTouch AT 10G, Руководство пользователя

Поделиться
Скачать
Netscout OneTouch AT 10G Скачать руководство пользователя страница 60

OneTouch AT 10G

User Manual

58

Organize User Tests on the Test Tiers

User tests are performed starting with the left side of the bottom 
tier, progressing from left to right on each tier, ending with the 
right-most test on the top tier.

You can use the test tiers to logically group your tests in a way 
that is meaningful to you. You can customize the test tier names 
to match your logical test grouping.

Rename the Clouds

On the HOME screen, the user test tiers are separated by clouds. 
By default, the cloud names are Public/Internet and Private/
Intranet. Tap a cloud to open the cloud’s SETUP and RESULTS 
screen. The SETUP tab lets you rename the cloud. The RESULTS 
tab provides a summary of the number of tests on the tier above 
and the number of tests that failed when AutoTest was run.

Содержание OneTouch AT 10G

























































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды