Netscout OneTouch AT 10G, Руководство пользователя

Страница: 41 / 248

Chapter 1: Get Acquainted
Set Preferences
39
3
Tap the setting you want to change:

To set the date, tap Date . Tap <left arrow> or <right arrow>
to select a month and year for the calendar, then select the
correct date on the calendar. Tap DONE to save your settings.

To set the time, tap Time . Tap <up arrow> or <down arrow>
to increase or decrease the setting for hours, minutes, and
seconds. Tap DONE to save your settings.

To set the date format, tap Date Format , then select a format
for the day ( DD ), month ( MM) , and year ( YYYY ). Note that the
date format used in file naming of reports, screen shots,
packet captures, etc. is based on the language setting. See
“Language” on page 38.

To set the time format, tap 12 hr or 24 hr to use a 12-hour
clock or a 24-hour clock.
Note
If you remove the battery and do not connect the AC
adapter, the clock keeps the current date and time for
a minimum of 24 hours.
Number Format
The analyzer can show decimal fractions with a decimal point
(0.00) or a comma (0,00).
1
On the HOME screen, tap TOOLS .
2
Scroll down to the Maintenance Tools section and tap 0.0 or
0,0 on the Number button.
Units for Length Measurements
1
On the HOME screen, tap TOOLS .
2
Scroll down to the Maintenance Tools section and tap ft for
feet or m for meters on the Length button.
Timeout Periods (Power-Down and Backlight)
To increase battery operating time, the analyzer can turn off the
backlight and/or automatically power down when you do not
press any keys for a specified period.