manualshive.com logo in svg

Netscout OneTouch AT 10G, Руководство пользователя

Поделиться
Скачать
Netscout OneTouch AT 10G Скачать руководство пользователя страница 19

Chapter 1: Get Acquainted

AC Adapter and Battery

17

Use the Product only as specified or hazardous laser 
radiation exposure can occur.

Caution

To prevent damage to the Product, accessories, or 
cables under test and to prevent data loss, read all 
safety information given in all documentation 
supplied with the Product.

Do not connect the Product to a telephone line or 
ISDN line.

Use the correct cables and connectors when 
connecting the Product to a network.

Do not block or restrict the Product’s air intake or 
exhaust ports.

Contact NETSCOUT

For more contact information, go to our website.

http://enterprise.netscout.com
[email protected]

Toll free: +1-844-833-3713 
International: 978-320-2150

Additional Resources

For OneTouch analyzer product information and accessories, see 

http://enterprise.netscout.com

.

For help in Link-Live Cloud Service, go to 

https://app.link-live.com/support

.

AC Adapter and Battery 

You can use the AC adapter or the included lithium ion battery to 
supply power to the analyzer. The AC adapter recharges the 
battery.

Содержание OneTouch AT 10G

























































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды