Netscout LinkRunner G2, Руководство пользователя

Страница: 45 / 91

AutoTest
To run AutoTest, connect the RJ-45 port or the
Fiber port on the top of the LinkRunner G2 to an
active network switch. Touch the NETSCOUT logo
icon
at the bottom of the screen to open the
LinkRunner G2 testing application.
Each individual test is presented on its own card.
Tap the down caret
on the right side of a card
to expand and view detailed results.
The AutoTest tab
header shows the
number of failed
tests (if any) in red
and the number
of warnings in
yellow. In the
image on this
page, the PoE,
DHCP, and Link-
Live upload tests
have failed. The
test icons also turn green, yellow, or red based on
the test results.
45
LinkRunner G2 Tests and Results