Netscout aircheck G2 Скачать руководство пользователя страница 73

Страница: 73 / 141

Verifying Connectivity and Coverage

Figure 41. The Connect to AP Test Results

Target Tests

Default Gateway:

Indicates whether or not the configured

gateway could be successfully pinged.

DHCP Server:

Indicates whether or not the DHCP server

could be successfully pinged.

DNS1 and DNS2:

Indicate whether the primary (DNS1) and

secondary (DNS2) DNS servers could be successfully pinged.

(User-Definable) Targets:

Indicates whether or not the user-

configured test targets could be successfully pinged or

reached with a TCP Port Open test.

NOTE:

The default target is

www.google.com

, but you

can add and edit test targets.

See “Defining Ping and

TCP Port Open Test Targets,” page 56.

Link-Live Upload:

Indicates whether the Tester was able to

upload the current test results to a Link-Live account.

See

“Getting Started in Link-Live Cloud Service,” page 46.

PHY Data Rate:

The highest measured physical transmit

data rate.

NOTE:

If the Tester roams to a new AP after a connection

test has completed, a data rate of

will be displayed.

The

indicates that AirCheck G2 is not currently

transmitting Wi-Fi data and a data rate cannot be

obtained.

Содержание aircheck G2














































































































































Результаты поиска

Содержание aircheck G2

Отзывы:

Бренды по названию

Популярные бренды

Netscout aircheck G2, Руководство пользователя

Результаты поиска

Содержание aircheck G2

Отзывы:

Бренды по названию

Популярные бренды