Netscape Certificate Management System 6.0, Руководство пользователя

Страница: 71 / 377

RequestInQJob Plug-in Module
Chapter 2 Job Plug-in Modules 71
Figure 2-3
Parameters defined in the RequestInQJob module
Table 2-3 gives details for each of these parameters.
Table 2-3
Description of parameters defined in the RequestInQJob module
Parameter Description
enabled
Specifies whether the job is enabled or disabled. Check the box to enable the
job. Uncheck the box to disable the job. If you enable the job and set the
remaining parameters correctly, the server runs the job at scheduled intervals.
cron
Specifies the
cron
specification for when this job should be run. This is the
time at which the Job Scheduler daemon thread checks the queue for pending
requests.
Permissible values: Must follow the convention specified in “Schedule for
Executing Jobs” on page 76.
Example:
00**0
subsystemid
Specifies the subsystem that this job is for.
Permissible values:
ca
or
ra
.
•
ca
specifies that the job is for the Certificate Manager.
•
ra
specifies that the job is for the Registration Manager.
Example:
ca