NetPing IO R401, Руководство пользователя

Страница: 16 / 24

[ENG] NetPing IO R401, User Guide -[ENG] [R401] 5. Connection of sensors
[ENG] [R401] 5. Connection of sensors
–
Coloured cable Terminal
Coloured GND
A logic level on the line in the "output" mode used for power supply will control the operation of the buzzer. When
log. 1 - the beacon is active, at log. 0 - the beacon is off.
The sensor is supplied with a non-detachable cable with a lug at the ends. You can extend the length of the cable
using
Cable 4 extenders, 4m , which are connected in series into each other, or independently using any wire with a
cross section of at least 0.4 mm
2
. The maximum permissible loop length is 100 meters.
Airflow GRID 120 * 120 * 10mm NC
This sensor is a "dry contact" type sensor, so the order of connecting wires does not matter. The number of
connected sensors is restricted only by the number of free IO1...2 and I3...4 lines.
Cables Terminal
The first wire One of the lines IO1...2 or I3...4