NG800
User Manual for NRSW version 4.5.0.100
Client Management
Once you have successfully set up an OpenVPN server tunnel, you can manage and enable clients
connecting to your service. Currently connected clients can be seen on this page, including the connect
time and IP address. You may kick connected clients by disabling them.
Clients
Networking
NetModule Router Simulator
Hostname NB1600
Software Version 4.4.0.103
© 2004-2020, NetModule AG
OpenVPN
Administration
Tunnel Configuration
Client Management
IPsec
Administration
Tunnel Configuration
PPTP
Administration
Tunnel Configuration
Client Management
GRE
Administration
Tunnel Configuration
L2TP
Administration
Tunnel Configuration
Client Management
Client
Address
Networks
Client1
dynamic
Download
HOME
INTERFACES
ROUTING
FIREWALL
VPN
SERVICES
SYSTEM
LOGOUT
Figure 5.27.: OpenVPN Client Management
In the Networking section you can specify a fixed tunnel endpoint address for each client. Please note
that, if you intend to use a fixed address for a particular client, you would have to apply fixed addresses
to the other ones as well.
You may specify the network behind the clients as well as the routes to be pushed to each client.
This can be useful for routing purposes, e.g. in case you want to redirect traffic for particular networks
towards the server. Routing between the clients is generally not allowed but you can enable it if desired.
Finally, you can generate and download all expert mode files for enabled clients which can be used to
easily populate each client.
Operating in server mode with certificates, it is possible to block a specific client by revoking a possibly
stolen client certificate (see
98
Содержание NG800
Страница 13: ...NG800 User Manual for NRSW version 4 5 0 100 3 Specifications 3 1 Appearance 13 ...
Страница 124: ...NG800 User Manual for NRSW version 4 5 0 100 124 ...
Страница 184: ...NG800 User Manual for NRSW version 4 5 0 100 5 9 LOGOUT Please use this menu to log out from the Web Manager 184 ...