NB3000-Line-Hd User Manual 4.2
Running a device server, the following settings can be applied:
Figure 5.18.: Serial Port Settings
Parameter
Serial Settings
Physical protocol
Selects the desired physical protocol on the serial port
Baud rate
Specifies the baud rate run on the serial port
Data bits
Specifies the number of data bits contained in each frame
Parity
Specifies the parity used for every frame that is transmitted or
received
Stop bits
Specifies the number of stop bits used to indicate the end of a
frame
Software flow control
Defines the software flow control for the serial port,
XOFF
will
send a stop,
XON
a start character to the other end to control
the rate of any incoming data
Hardware flow control
You may enable RTS/CTS hardware flow control, so that the
RTS and CTS lines are used to control the flow of data
71
Содержание NB3000-Line-Hd
Страница 15: ...3 Speci cations 3 1 Appearance 6...
Страница 106: ...NB3000 Line Hd User Manual 4 2 5 6 VPN 5 6 1 OpenVPN OpenVPN Administration Figure 5 28 OpenVPN Administration 97...
Страница 186: ...NB3000 Line Hd User Manual 4 2 5 9 LOGOUT Please use this menu to log out from the Web Manager 177...