Factory default settings
You can reset the access point to the factory default settings, which are shown in the
following table.
For more information about resetting the access point to its factory settings, see Return
the access point to its factory default settings on page 172.
Table 3. Factory default settings
Default Setting
Feature
Management and login settings
NETGEAR Insight (Cloud/Remote)
Note: To access the local browser UI, you must select Web-browser (Local) as the
management mode.
Management mode
192.168.0.100, if not connected to a network.
Note: If connected to a network, the access point receives an IP address from a DHCP
server or router in the network.
User login URL
admin, nonconfigurable
User name
password, case-sensitive, configurable
Note: The first time that you log in to the local browser UI, you must change the AP
login password. If you previously added the access point to a NETGEAR Insight
network location and managed the access point through the Insight Cloud Portal or
Insight app, enter the Insight network password for that location. For more information,
see Connect over WiFi using the NETGEAR Insight app on page 26.
AP login password
WiFi network settings for initial setup and WiFi login
The SSID for initial setup is NETGEARxxxxxx-SETUP, where xxxxxx is the last six
hexadecimal digits of the access point’s MAC address.
Note: The first time that you log in to the local browser UI, you must change the SSID.
If you previously added the access point to a NETGEAR Insight network location and
managed the access point through the Insight Cloud Portal or Insight app, this
requirement might not apply.
Initial SSID name
WPA3/WPA2 Personal
WiFi password (network key): sharedsecret
Note: The first time that you log in to the local browser UI, you must change the WiFi
password. If you previously added the access point to a NETGEAR Insight network
location and managed the access point through the Insight Cloud Portal or Insight
app, this requirement might not apply.
Initial WiFi security
Automatically selected (Auto) for all radios.
Note: The available and supported channels depend on the country and region that
you select for the access point.
RF channels
General system settings
AP mode
Operating mode
User Manual
254
Factory Default Settings and
Technical Specifications
Insight Managed WiFi 6E AXE7800 Tri-band Multi-Gig Access Point Model WAX630E
