For more information about the LAN 1/PoE++ port connection, see Set up and
connect the access point to your network on page 22.
•
LAN 2 port: The LAN 2 port is a Gigabit Ethernet RJ-45 port that you can use to
connect the access point to the same switch as the LAN 1 port for a link aggregation
(LAG) connection. The switch must be capable of supporting a LAG connection,
which you must configure on the switch. For more information about setting up and
enabling a LAG on the access point, see Manage the link aggregation capability on
page 147.
Access point label
The access point label on the bottom panel shows the QR code, serial number, MAC
address, setup WiFi network name (SSID), and network key (password) of the access
point.
Figure 3. Access point label location
Figure 4. Access point label
User Manual
17
Hardware Overview
Insight Managed WiFi 6E AXE7800 Tri-band Multi-Gig Access Point Model WAX630E
