Change the country or region of operation
You can change the country or region in which the access point operates. Note the
following:
•
Make sure that the country is set to the location where the device is operating. You
are responsible for complying with the local, regional, and national regulations that
are set for channels, power levels, and frequency ranges.
•
It might not be legal to operate the access point in a country or region other than
those listed in the menu. If your country or region is not listed in the menu, you must
check with your local government agency or check the NETGEAR website for
information about which channels you can use.
•
In some countries, the access point is sold with a preconfigured country or region
setting and you cannot change it.
To change the country or region of operation:
1. Launch a web browser from a computer that is connected to the same network as
the access point or directly to the access point through an Ethernet cable or WiFi
connection.
2. Enter the IP address that is assigned to the access point.
A login window displays.
If your browser displays a security warning, you can proceed, or add an exception
for the security warning. For more information, see What to do if you get a browser
security warning on page 44.
3. Enter the access point user name and password.
The user name is admin. The password is the one that you specified. The user name
and password are case-sensitive.
If you previously added the access point to a NETGEAR Insight network location and
managed the access point through the Insight Cloud Portal or Insight app, enter the
Insight network password for that location. For more information, see Connect over
WiFi using the NETGEAR Insight app on page 26.
The Dashboard page displays.
4. Select Management > Configuration > System > Basic.
The General page displays the basic system settings.
5. Select a country or region from the Country / Region menu.
6. Click the Apply button.
A warning pop-up window displays.
User Manual
154
Manage and Maintain the Access
Point
Insight Managed WiFi 6E AXE7800 Tri-band Multi-Gig Access Point Model WAX630E
