c. Click the Apply button.
Your settings are saved and the AP is configured for the new country or region.
Do not close the browser page. If you are connected over WiFi, your connection
might be terminated.
d. If you want to continue to configure the AP, reconnect to the AP (if you were
connected over WiFi and your connection was terminated) and log back in to
the local browser UI by entering your local device password.
The BASIC Home page displays.
The Home page displays various panes that let you see the status of your AP at
a glance. You can now configure and monitor the AP.
Connect the AP to a modem and log in for
the first time
Use this procedure for the setups that are described in the following table:
Table 4. WiFi setups behind a modem with the AP functioning in router mode
What you want
What you have
Add WiFi 6 and a wired network to your home or office.
Broadband, cable, or DSL device without WiFi (modem
only)
Set up a private WiFi 6 network.
Ethernet wall outlet with Internet service
Figure 7. Connect the AP to your modem
User Manual
28
Installation and Initial Log-in
WiFi 6 AX1800 Dual Band Wireless Access Point WAX204
