• Turn the Internet LED to blinking green or amber. This setting is optional. When
the traffic limit is reached, the Internet LED alternates between green and amber.
• Disconnect and disable the Internet connection. This setting is optional. When
the traffic limit is reached, the Internet connection is disconnected and disabled.
13. Click the Apply button.
Your settings are saved.
The Internet Traffic Statistics section helps you to monitor the data traffic. For more
information, see View the Internet traffic volume and statistics [router mode] on page
164.
Restrict Internet traffic by connection time [router mode]
If the AP is in router mode, you can record and restrict the traffic by connection time.
This is useful when your ISP measures your connection time.
To record and restrict the Internet traffic by connection time:
1. Launch a web browser from a computer or mobile device that is connected to a WiFi
network or LAN port on the AP.
2. Enter http://www.routerlogin.net in the address field.
A login window displays.
If your browser displays a security warning, dismiss the warning. For more information,
see Find the IP address of the AP when you cannot use routerlogin.net on page 32.
3. Enter the AP local device password.
The local device password is the one that you specified. The local device password
is case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > Traffic Meter.
The Traffic Meter page displays.
5. Select the Enable Traffic Meter check box.
6. Select the Connection time control radio button.
The AP must be connected to the Internet for you to be able to select the Connection
time control radio button.
7. In the Monthly Limit field, enter how many hours per month are allowed.
The AP must be connected to the Internet for you to be able to enter information in
the Monthly Limit field.
User Manual
163
Maintain and Monitor
WiFi 6 AX1800 Dual Band Wireless Access Point WAX204