Your settings are saved.
Set up a default DMZ server [router mode]
A default DMZ server is helpful when you are using some Internet services and
videoconferencing applications that are incompatible with Network Address Translation
(NAT). The AP is programmed to recognize some of these applications and to work
correctly with them, but other applications might not function well. In some cases, one
local computer can run the application correctly if the IP address for that computer is
entered as the default DMZ server.
WARNING:
DMZ servers pose a security risk. A computer designated as the default
DMZ server loses much of the protection of the firewall and is exposed to exploits from
the Internet. If compromised, the DMZ server computer can be used to attack other
computers on your network.
To set up a default DMZ server:
1. Launch a web browser from a computer or mobile device that is connected to a WiFi
network or LAN port on the AP.
2. Enter http://www.routerlogin.net in the address field.
A login window displays.
If your browser displays a security warning, dismiss the warning. For more information,
see Dismiss a browser security warning on page 39.
3. Enter the AP local device password.
The local device password is the one that you specified. The local device password
is case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Setup > WAN Setup.
The WAN Setup page displays.
5. Select the Default DMZ Server check box.
6. Enter the LAN IP address of the computer that must function as the DMZ server.
7. Click the Apply button.
Your settings are saved.
User Manual
66
Firewall Security and Access
Rules
WiFi 6 AX1800/AX3200 Dual Band Wireless Access Points, WAX202 and WAX206
