NETGEAR WAX202, Руководство пользователя, Страница: 108 / 161

(Continued)
Description Field
Displays if the WiFi network is enabled (see Set up or change an open or secure
WiFi network on page 49 or Enable or disable a WiFi network on page 55).
Wireless AP
Displays if the WiFi network broadcasts its SSID (see Broadcast or hide the SSID
for a WiFi network on page 56).
Broadcast Name
Check the Internet connection status
To check the Internet connection status:
1. Connect your computer or mobile device to the AP in one of the following ways
•
Connect directly to the AP’s WiFi network or LAN. (Applies to the AP in either
operation mode.)
•
Connect to the same network that the AP is connected to. (Applies only if the AP
is operating in AP mode.)
2. Launch a web browser and enter http://www.routerlogin.net in the address field.
Instead, if you are connected to same network as the AP, enter the LAN IP address
that is assigned to the AP. For information about finding the IP address, see Find the
IP address of the AP when you cannot use routerlogin.net on page 34.
A login window displays.
If your browser displays a security warning, dismiss the warning. For more information,
see Dismiss a browser security warning on page 39.
3. Enter the AP local device password.
The local device password is the one that you specified. The local device password
is case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED.
The ADVANCED Home page displays.
5. In the Internet Port pane (in router mode) or in the LAN Port pane (in AP mode), click
the CONNECTION STATUS button.
The Connection Status pop-up window displays.
The information that displays depends on whether the AP is in router mode (the
default operation mode) or AP mode and on the type of Internet connection.
User Manual 108 Maintain and Monitor
WiFi 6 AX1800/AX3200 Dual Band Wireless Access Points, WAX202 and WAX206