manualshive.com logo in svg

NETGEAR VEVG2660-1TKSAS, Руководство пользователя

Поделиться
Скачать
NETGEAR VEVG2660-1TKSAS Скачать руководство пользователя страница 54

Specify Network Settings 

54

VDSL Voice Gateway 

View or Change the WAN Settings

You can view the wide area network (WAN) settings for the Internet port. You can set up a 
DMZ (demilitarized zone) server, change the maximum transmit unit (MTU) size, and enable 
the gateway to respond to a ping to its WAN (Internet) port. 

To view or change the WAN settings:

1. 

Launch a web browser from a computer or wireless device that is connected to the 
network.

2. 

Type 

http://routerlogin.net 

or 

http://10.0.0.2

.

A login screen displays.

3. 

Enter the gateway user name and password.

The user name is 

admin

. The default password is 

admin

. The user name and password 

are case-sensitive.

The BASIC Home screen displays.

4. 

Select ADVANCED > Setup > WAN Setup.

5. 

View or change the following settings:

•

Enable PPPoE Relay. Allow a PPPoE client on a local computer to connect to a 
remote PPPoE server with the gateway acting as a relay agent.

•

WAN Preference

. By default, this is set to 

Auto-Detect

, but you can specify 

Must 

use DSL WAN

 or 

Must use Ethernet WAN

.

•

Disable Port Scan and DoS Protection

. DoS protection protects your LAN against 

denial of service attacks such as Syn flood, Smurf Attack, Ping of Death, and many 
others. Select this check box only in special circumstances. 

Содержание VEVG2660-1TKSAS





















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды