manualshive.com logo in svg

NETGEAR VEVG2660-1TKSAS, Руководство пользователя

Поделиться
Скачать
NETGEAR VEVG2660-1TKSAS Скачать руководство пользователя страница 112

Troubleshooting 

112

VDSL Voice Gateway 

Problems with Date and Time

From the main menu, select 

ADVANCED > Security > Schedule

 to display the current date 

and time of day. The gateway uses the Network Time Protocol (NTP) to obtain the current 
time from one of several network time servers on the Internet. Each entry in the log is 
stamped with the date and time of day. Problems with the date and time function can include 
the following:

•

Date shown is January 1, 2000. 
Cause. The gateway has not yet successfully reached a network time server. Check that 
your Internet access is configured correctly. If you have completed configuring the 
gateway, wait at least five minutes, and check the date and time again.

•

Time is off by one hour. 
Cause. The gateway does not automatically detect daylight saving time. In the Schedule 
screen, select the 

Automatically adjust for Daylight Savings Time

 check box.

Содержание VEVG2660-1TKSAS





















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды