NETGEAR ProSafe Quad WAN FR538G, Справочное руководство

Страница: 98 / 194

ProSafe Quad WAN Gigabit Firewall FR538G Reference Manual
4-26 Firewall Protection and Content Filtering
v1.0, November 2007
1. In the Custom Services Table, click the Edit icon adjacent to the service you want to edit. The
Edit Service screen will display.
2. Modify the parameters you wish to change.
3. Click Reset to cancel the changes and restore the previous settings.
4. Click Apply to confirm your changes. The modified service will display in the Custom
Services Table.
Setting a Schedule to Block or Allow Specific Traffic
If you enabled Content Filtering in the Block Sites menu, or if you defined an outbound or inbound
rule to use a schedule, you can set up a schedule for when blocking occurs or when access is
restricted. The firewall allows you to specify when blocking will be enforced by configuring one
of the Schedules—Schedule 1, Schedule 2 or Schedule 3.
To invoke rules and block keywords or Internet domains based on a schedule:
1. Select Security > Schedule from the main menu, and then select the Schedule 1 tab. The
Schedule 1 screen will display.
2. Check the radio button for All Days or Specific Days. If you chose Specific Days, check the
radio button for each day you want the schedule to be in effect.
3. Check the radio button to schedule the time of day: All Day, or Specific Times. If you chose
Specific Times, enter the Start Time and End Time fields (Hour, Minute, AM/PM), which will
limit access during certain times for the selected days.
4. Click Reset to cancel your settings and revert to the previous settings.
5. Click Apply to save your settings to Schedule 1.
Repeat these 5 steps to set to a schedule for Schedule 2 and Schedule 3.